Specifications
Downloads
Compatible products
Electrical specifications | ||
User interface | 12-way dip switch | |
Status LED | Yes (for power on and trigger) | |
Configuration software | - | |
Output channels | 1, constant current | |
Output current range | (A) | 5 mA-160 mA (in steps of 5 mA) pulsed or continuous 100 mA-3.2 A (in steps of 100 mA) pulsed 1.5 A-17 A (in steps of 500 mA) pulsed |
Max dissipable thermal power per channel | (W) | 8 |
Synchronization inputs n° (1) | 1 opto-isolated digital input | |
Synchronization outputs n° | 1 opto-isolated digital output | |
Pulse delay (2) | (μs) | - |
Pulse width (2) | (μs) | - |
Timing repeatability for pulse delay (3) | (μs) | - |
Timing repeatability for pulse width (3) | (μs) | - |
Supply voltage (4) | (V) | 24 |
Output voltage | (V) | 0-12 (with step-up disabled) or 0-36 (with step-up enabled) |
Max startup/inrush current | (A) | 2.5 |
Mechanical specifications | ||
Length (5) | (mm) | 70 |
Width (5) | (mm) | 119 |
Height (5) | (mm) | 82 |
Mass | (g) | 500 |
Mounting | DIN rail |
Environmental specifications | ||
Operating temperature | (°C) | 0-40 |
Storage temperature | (°C) | 0-50 |
Operating relative humidity | (%) | 20-85, non condensing |
IP rating | IP20 | |
Installation | Indoor use only |
Last update 22 Mar 2024
Notes
- Operate from 3.3V to 24V.
- In variable resolution depending on selected value.
- Digital processing.
- 24V supply must be regulated at ± 10%.
- Including DIN rail where available on the product.
Ordering information
ADPT001 consists of - one RS485-USB adapter and - one cable for connection with LTDV6CH. In order to configure LTDV6CH via software a RS485 port must be provided. To be ordered separately.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Technical documents
Firmware
Datasheet
Download datasheet
Layout files
DXF
PDF
STEP